Marwar Burl
0 Reviews
|SKU: 112061
Delivery and return policies
Delivery in 12-15 days
Returns accepted within 30 days
Free delivery
Dispatched from: INDIA
The Marwar Burl low media console is a long, ground-hugging piece with softly rounded ends. The curved side panels wrap into a straight-grain top, and four thick cylindrical legs lift the body just off the floor. The result is a calm, sculptural silhouette that sits well under a wall-mounted television or along a window.
Four equal drawers run across the front, each faced with burl wood veneer. The swirling grain and small dark pin knots make every drawer face different, and the dark bronze-tone round knobs are easy to grip while staying visually quiet. The frame, top and legs are solid wood in a warm walnut-toned finish, and the drawer boxes are built from plywood.
The drawers hold remotes, cables, streaming devices, board games, table linen or books, keeping the surface clear. The 5-inch floor clearance lets air and light pass beneath the unit and makes cleaning easier. A satin PU finish protects the surface while keeping the wood looking natural.
Made by Furniture From Factory in Jodhpur, Rajasthan, the Marwar Burl suits living rooms, family lounges, apartments and villas. Its low, wide proportions also suit hotel suites, boutique hotel lounges and reception areas. It pairs naturally with the Aravali Burl bedside table.
Wood and veneer vary naturally in grain, tone and figure, so your piece may differ slightly from the photographs. Size, wood species, finish, drawer layout and hardware can be customised for individual and project orders.
Key Features
- Four equal full-width drawers with burl wood veneer fronts
- Low 17″ profile suited to wall-mounted and low-set televisions
- Rounded solid wood end panels for a soft, sculpted look
- Four turned cylindrical legs with 5″ floor clearance
- Straight-grain solid wood top with a fine seam line
- Dark bronze-tone round knobs
- Satin PU finish that keeps the grain visible
- Plywood drawer boxes
- Felt or non-marking floor pads
- Delivered fully assembled
- Customisable size, wood, finish and drawer layout
- Made to order in Jodhpur, Rajasthan
Suitable Uses
- Living rooms and family lounges as a TV or media unit
- Bedrooms as a low chest at the foot of the bed or beneath a window
- Apartments and villas
- Hotel suites and boutique hotel lounges
- Reception and waiting areas
- Entrance halls as a low console
- Boutique retail and showroom displays
Finish
- Surface finish: Clear polyurethane (PU) lacquer
- Sheen level: Low-sheen satin
- Wood finish: Warm medium-brown stain that keeps the grain visible
- Protective coating: PU topcoat resistant to everyday handling and light moisture
- Hardware finish: Dark bronze-tone
Colour
- Displayed colour: Warm walnut brown
- Visible undertone: Reddish-amber on the drawer fronts, with deeper chocolate tones on the frame and legs
- Natural variation: Burl veneer has swirling patterns and small dark pin knots. No two drawer fronts are identical.
- Available colours: Walnut brown (as shown)
- Custom colours: Available on request
Colour may vary slightly because of lighting, screen settings, natural grain and material batches.
Customisation Options
- Width, depth and height
- Wood species for the frame and legs
- Wood finish and stain tone
- Burl or other veneer for the drawer fronts
- Knob style and hardware finish
- Two, three or four drawer layouts
- Bulk and project quantities for hotels and residences
60″ W × 16″ D × 17″ H
Care Instructions
- Dusting: Wipe regularly with a soft, dry microfibre cloth.
- Spills: Blot immediately with a clean cloth. Do not rub.
- Cleaning: Use a slightly damp cloth, then dry straight away. A mild wood-safe polish can be used occasionally.
- Avoid: Bleach, ammonia, abrasive pads, silicone sprays and strong solvents.
- Sunlight: Keep out of prolonged direct sunlight to prevent fading.
- Moisture: Avoid damp walls and wet glasses without a coaster.
- Heat: Use trivets or mats under hot items. Keep electronics that get warm on the top with adequate ventilation, and keep the console away from heaters.
- Burl veneer: Do not scrape or use sharp objects on the drawer fronts.
- Hardware: Wipe knobs with a dry cloth and tighten occasionally if they loosen.
Care Instructions
- Dusting: Wipe regularly with a soft, dry microfibre cloth.
- Spills: Blot immediately with a clean cloth. Do not rub.
- Cleaning: Use a slightly damp cloth, then dry straight away. A mild wood-safe polish can be used occasionally.
- Avoid: Bleach, ammonia, abrasive pads, silicone sprays and strong solvents.
- Sunlight: Keep out of prolonged direct sunlight to prevent fading.
- Moisture: Avoid damp walls and wet glasses without a coaster.
- Heat: Use trivets or mats under hot items. Keep electronics that get warm on the top with adequate ventilation, and keep the console away from heaters.
- Burl veneer: Do not scrape or use sharp objects on the drawer fronts.
- Hardware: Wipe knobs with a dry cloth and tighten occasionally if they loosen.
Safety Instructions
- Place on a flat, stable floor. Use the leg pads to prevent scratching.
- Do not sit, stand or climb on the console.
- Avoid overloading the top or drawers. Make sure your television's base fits safely within the top surface, or wall-mount it.
- Open one drawer at a time and close it fully after use.
- Keep children away from open drawers and cables.
- Keep candles and open flames away from the wood surfaces.
- Lift with two people, holding the base rather than the top or knobs. Remove drawers before moving if possible.
- Check the knobs and drawer runners periodically.
- Stop using the piece and contact us if you find cracks, loose parts or other damage.
Safety Instructions
- Place on a flat, stable floor. Use the leg pads to prevent scratching.
- Do not sit, stand or climb on the console.
- Avoid overloading the top or drawers. Make sure your television's base fits safely within the top surface, or wall-mount it.
- Open one drawer at a time and close it fully after use.
- Keep children away from open drawers and cables.
- Keep candles and open flames away from the wood surfaces.
- Lift with two people, holding the base rather than the top or knobs. Remove drawers before moving if possible.
- Check the knobs and drawer runners periodically.
- Stop using the piece and contact us if you find cracks, loose parts or other damage.
- Main frame and end panels Solid wood, rounded profile
- Top Solid wood, straight-grain finish
- Drawer fronts Burl wood veneer on a stable engineered-wood substrate
- Drawer boxes Plywood construction
- Legs Solid wood, turned cylindrical
- Hardware Round knobs in a dark bronze-tone finish
- Floor protection Felt or non-marking pads under the legs
Find everything you need to know?
REVIEWS
Product guidance
Questions about Marwar Burl
What materials is the Marwar Burl made from?
The listed materials for the Marwar Burl are Main frame and end panels Solid wood, rounded profile, Top Solid wood, straight-grain finish, Drawer fronts Burl wood veneer on a stable engineered-wood substrate, Drawer boxes Plywood construction, Legs Solid wood, turned cylindrical, Hardware Round knobs in a dark bronze-tone finish, Floor protection Felt or non-marking pads under the legs. Review the specifications on this page for the selected variation, or contact us before ordering if you need confirmation of a particular wood, finish, or upholstery.
Can I customize the Marwar Burl in a different size or finish?
Yes — the Marwar Burl can be made to any custom dimensions (width, depth, height) and in your choice of wood (mango, sheesham, teak, acacia), stain colour, painted finish, upholstery fabric, or hardware. Email sales@furniturefromfactory.com with your specifications for a quote.
How long will delivery take for the Marwar Burl to the USA?
In-stock orders are normally processed within 2–4 business days. After dispatch, small items typically take 3–7 business days and large-furniture freight typically takes 7–14 business days. Made-to-order timing depends on the specification. Shipping cost is calculated for the destination and optional white-glove service may be available.
Is the Marwar Burl available for international shipping?
International delivery for the Marwar Burl is available by custom shipping quote. Contact sales@furniturefromfactory.com with the destination postcode and selected variation so our logistics team can confirm availability, freight cost, and estimated timing.
Where is the Marwar Burl manufactured?
The Marwar Burl is produced in Jodhpur, Rajasthan, India. Review the product's Materials and Specifications sections for its construction details; contact us before ordering if a particular origin, material, or process must be confirmed in writing.
How should I care for the Marwar Burl?
For solid wood STORAGE & MEDIA FURNITURE like the Marwar Burl: dust regularly with a soft, dry cloth; wipe spills immediately; apply a natural wood conditioner or furniture oil every 6–12 months to maintain the finish; keep away from direct sunlight and heating vents to prevent drying or fading.
What is the return policy for the Marwar Burl?
Eligible standard catalog items can be returned within 30 days of delivery if they remain unused, unassembled, and in resalable condition. Custom-made items are not returnable after production begins. Customers pay return freight unless an item arrives damaged or defective.
Is the Marwar Burl available in custom colours or finishes?
Yes — the Marwar Burl is available in a range of finishes: natural, walnut stain, ebony, white, distressed, and custom RAL or Pantone colour matching. Email sales@furniturefromfactory.com with your colour preference and we will confirm availability and lead time.